How to Misguide Your Visitor – or What Not to Pay Attention to During a Plant Visit!

And here's what I want you to know...
And here’s what I want you to know…

In the previous post I talked about how to have a successful plant tour and how to get the most information out of the visit. Today’s post shares the tricks of the trade on what things the plant does NOT want you to know about.See through the ruse during a plant tour and discover how good the plant really is.

Read moreHow to Misguide Your Visitor – or What Not to Pay Attention to During a Plant Visit!

Make Your Plant Tour a Success!

A typical shop floor There are thousands of things to see during a plant tour. However, if you really want to know how good the plant is, there are a couple of tricks on what to watch during the tour. This post will give you a few quick but reliable metrics to estimate the performance of the plant.

Read moreMake Your Plant Tour a Success!

Visit to Euromold for the Latest in 3D Printing

The next Euromold trade show in Frankfurt will be in a few weeks. While the show generally presents products related to moldmaking  and tooling, they also have a large section on 3D printing. This is a good time for me to talk about 3D printing and my last visit to Euromold last year.

Read moreVisit to Euromold for the Latest in 3D Printing

What the OEE is Good for … and What it’s Not

What is an OEE good for anyway?
What is an OEE good for anyway?

Measuring the Overall Equipment Effectiveness (OEE) is one thing, but before you measure the OEE you should know when and where you actually need the OEE to improve your industry. This post describes what the OEE is good for and what it’s not.

Read moreWhat the OEE is Good for … and What it’s Not

Top Three Methods on how to Fudge Your OEE

How to fudge your OEE!
How to fudge your OEE!

The Overall Equipment Effectiveness (OEE) is by far and wide the most lied-about and fudged measurement on the shop floor, both intentionally or by accident. This post tells you the top three different ways how an OEE is fudged, so you know which OEE to trust and which one not.

Read moreTop Three Methods on how to Fudge Your OEE

What is OEE? – Definition of OEE

What is an OEE?
What is an OEE?

OEE, the abbreviation for Overall Equipment Effectiveness (or sometimes Overall Equipment Efficiency), is a measure of the utilization of a machine. It is frequently used on the shop floor, often determines part of the performance-based compensation of the managers, and is by far and wide the most lied-about and fudged measurement on the shop floor.

Read moreWhat is OEE? – Definition of OEE