AllAboutLean: The #1 Lean Manufacturing & Production Blog

How to Determine Your Lot Size – Part 1

Christoph Roser January 17, 2017

There are a few factors that can influence lot size: machine batch size, changeover time, size of the container, shipment sizes, and the size of your customers’ orders, which then are combined in the set up of the information flow. All of these factors can be influenced to move toward the true north of lot size one! Also, do not confuse the lot size with the number of parts per kanban. They are related but can be different. In this series of three posts, let me explain in more detail how the factors come together for you to determine the lot size of your processes.

The Lean Bucket Brigade – Part 2: Details and Caveats

Christoph Roser January 10, 2017

In my last post I explained the basics of the bucket brigade as a self-organizing manufacturing line. The key to making this system work is the process for handing over the part to the next worker. An unsuitable hand-over could mean lots of waiting time for the workers. Hence, I would like to go into more detail on how to do the hand-over of the part.

The Lean Bucket Brigade – Part 1: Overview

Christoph Roser January 3, 2017

Many topics in lean address how to deal with uncertainty and fluctuations (or mura for unevenness). There is a particularly neat trick for manual lines that self-organizes fluctuations in the workload: the Bucket Brigade (also known as bump-back or bouncing line)! It does have some advantages, but it also has quite a few limitations and prerequisites for it to work. Most importantly it works best only for very short cycle times as for example picking materials. Unfortunately, these requirements are rarely mentioned in literature. Let me show you the basics work in this post before I go into some of the trickier details in the next post.

Dealing with Uncertainty

Christoph Roser December 27, 2016

A lot of decisions in lean manufacturing have uncertainty. How many products will I sell (and what is my customer takt)? Which layout is more efficient? Should I believe expert A or expert B? Uncertainty is a part of life in manufacturing. In fact, the higher up you go in the hierarchy, the more you have to deal with uncertainty. And often these are not just simple “A or B” type of questions, but highly complex and interacting decisions like “What should our new line look like?” Here are some suggestions on how to deal with uncertainty. Please note that they will not answer all of your questions but will help you make better decisions.

How to Ramp Up a Kanban System – Part 2: The Switch

Christoph Roser December 20, 2016

In my last post I described how to prepare for the implementation of a kanban system. This post goes into more detail on the actual change to the new kanban system. You surely know that every part should have a kanban. But what do you do if you have more kanban than parts? What do you do if you have more parts than kanbans? Find the answers below.

How to Ramp Up a Kanban System – Part 1: Preparation

Christoph Roser December 13, 2016

Designing a kanban system on paper is much easier than implementing it on the shop floor. In many of my previous posts I discussed the design of a kanban system in detail. In these two posts I will discuss the steps needed to actually put the system on the ground. This first post is the preparation, and my next post will be the actual switch to the new kanban system.

Welcome to AllAboutLean

The #1 Lean Manufacturing Blog*

And now, scroll down, enjoy the AllAboutLean blog, and... organize your industry!