Toyota is a company that is constantly evolving, aiming to reduce waste. Over the last few years, I have heard about changes to the Toyota assembly lines to improve efficiency. During a recent trip to Japan, I was able to observe the assembly line at the Motomachi plant. In this post I will show the … Read more
Have you ever been to a value stream mapping workshop? If so, you may remember the insistence of the coach to start any mapping activities at the customer side (the end) and then work your way backward (to the beginning). Yet, if you would ask why, you would get only some vague answers about this … Read more
Lean manufacturing pull systems use both FIFO lanes and supermarkets to manage the material and information flow. In my previous post we covered the basics about supermarket and FIFO lanes. Now we go into details about the ten rules when to use a supermarket instead of a FIFO.
It is generally accepted knowledge that a lean manufacturing pull system uses both FIFO lanes and supermarkets to manage the material and information flow. However, there are few guidelines on when to use a supermarket and when to use a FIFO lane. This post is the first of a two-part series that will give ten … Read more
Throughout the history of industry, there has been a constant conflict between managers and subordinates. For some reason, we just don’t get along well with each other. Or, as philosopher Jean-Paul Sartre phrased it, “Hell is other people.” In fact, large advances in mechanization and automation were due to managers wanting to take power away … Read more
In the West, the standard approach for problem solving is to take a good look a the problem, after which a solution approach will pop into someone’s head. This approach is then optimized until the problem is solved. However, while this often ends up with one solution, it usually is far from the best solution … Read more
The next Euromold trade show in Frankfurt will be in a few weeks. While the show generally presents products related to moldmaking and tooling, they also have a large section on 3D printing. This is a good time for me to talk about 3D printing and my last visit to Euromold last year.
There is quite a difference between knowing in theory how to measure an Overall Equipment Effectiveness (OEE), and actually measuring it in practice. This post will give crucial tips and points on how to measure the OEE on a real shop floor.